Loading and unloading mobile belt conveyor conveyor manufacturer y1

Loading and unloading mobile belt conveyor conveyor manufacturer y1 Loading and unloading mobile belt conveyor conveyor manufacturer y1

Belt conveyors (belt conveyors, belt conveyors, belt elevators) are easy to use, practical and easy to use, and are the basic equipment transmission choices for many industries and enterprises. It is mainly divided into three situations: conventional type, logistics type and other special-shaped belt conveyors.
Install. Longer belt conveyors usually need to be produced and assembled in sections, and screws can be disassembled and assembled, which is very simple. After the production and debugging are completed, we will provide the corresponding videos, drawings, pictures and other materials, without having to send someone to install it. We need to send personnel to guide the installation, and the customer’s assistance is required. The installation fee is generally 10~15% of the value of the goods.
transportation. Transportation is nothing more than three methods: special vehicles, distribution and logistics. If you choose the first two, you need to pay the full payment before shipment. We will choose the best way for customers according to the belt conveyor and road conditions. We must ask customers to believe that nowadays business is difficult, and we will definitely show our sincerity for the sake of our customers.
size. 1. The length of the belt conveyor can refer to the length of a single belt, the axis distance between the rollers at both ends, the length of the main frame, etc. Generally, the larger value of the three is the length of the main frame as the length of the belt conveyor. 2. Commonly used rollers have a diameter of 50mm and a length of 800mm. 3. Commonly used roller diameter. The two rollers are 112mm, the middle main roller is 133mm, and the secondary roller is 89mm.

Conventional type belt conveyor XWPD—A300 A Conventional type 300 represents bandwidth
materials. The weight, volume, shape, conveying capacity, etc., need to be clear to the customer.
Main Frame. Angle iron, channel steel, square tube, round tube, stainless steel, etc., mainly angle iron and channel steel.
bandwidth. 300/500/600/650/800/1000/1200/1500mm, etc., 5/6/800 is more common.
With speed. The common range is 0.5~2.5m/s.
Lift. Manual, electric, hydraulic, etc., the default electric lift.
belt. The default is 4 layers, 10mm thick, black rubber belt with V-shaped non-slip stripes, and buckle connection.
Roller. Parallel, V-shaped, grooved, etc.
Main components and uses: Taiyuan channel steel large frame conveyor belt factory direct sales organic fertilizer loading and unloading conveyor, inclined feeding belt conveyor, TD75 corrugated sidewall belt conveyor can be used in the ambient temperature range of -15℃ to +40℃, The temperature of the conveyable materials is below 70℃, and the bulk density is 0.5-0.25t/m3. , (2) The climbing conveyor can be used in granule, chemical, metallurgy, electric power, light industry, grain, port and other industries. The specific gravity of transport and accumulation is 0.5-4.2 in the range of working environment temperature of -15℃~+40℃ Various bulk materials of t/m3. , 5. Vertical roller: used to limit the deviation of the conveyor belt, installed on the upper and lower transition section of the frame.

With the rapid development of science and technology, conveyors have been popularized in all corners and fields of human life, and their applications have become more and more extensive. It saves a lot of time and labor for mankind, and people’s daily life is increasingly inseparable from conveyors.
Belt conveyor has the advantages of large conveying capacity, simple structure, convenient maintenance, standardized parts, etc. It is widely used in mining, metallurgy and other industries to convey loose materials or finished items. According to the requirements of conveying technology, it can be conveyed by a single unit. It can be composed of multiple units or combined with other conveying equipment to form a horizontal or inclined conveying system to meet the needs of different layout types of operation lines. It is suitable for conveying powder, granular and small particles with a bulk density of less than 1.67/ton/m3. Lumpy low-abrasive materials and bagged materials, such as coal, gravel, sand, cement, fertilizer, grain, etc. The temperature of the delivered material is less than 60°C. The captain and assembly form can be determined according to user requirements, and the drive can be an electric drum or a drive device with a drive frame.

The belt conveyor has a variety of structures, including trough belt conveyors, flat belt conveyors, climbing belt conveyors, lateral belt conveyors, turning belt conveyors and other forms. Commonly used belt conveyors can be divided into: ordinary canvas core belt conveyor, steel rope core high-strength belt conveyor, full explosion-proof downward conveyor belt, flame-retardant belt conveyor, double-speed double-transport belt conveyor, reversible movement Belt conveyor, cold-resistant belt conveyor, etc. The belt conveyor is mainly composed of a frame, a conveyor belt, a belt roller, a tensioning device, and a transmission device.
Conveying machinery is divided into operating modes: 1: belt conveyor 2: screw conveyor 3: bucket elevator 4: roller conveyor 5: metering conveyor 6: plate chain conveyor 7: mesh belt conveyor, today’s focus Talk about the installation method of the belt conveyor.
In the belt conveyor installation project, the installation of the belt conveyor frame starts from the head frame, and then installs the middle frame of each section in sequence, and then installs the tail frame. Before installing the rack, first pull the center line over the entire length of the conveyor. Keeping the center line of the conveyor in a straight line is an important condition for the normal operation of the conveyor belt. Therefore, when installing each section of the rack, you must The quasi-centerline must also be leveled with a rack. The allowable error of the rack to the centerline is ±0.1mm per meter. However, the error of the center of the frame over the total length of the conveyor shall not exceed 35mm. After all the single sections are installed and correctly identified, the single sections can be connected.
Install the roller: After the frame, transmission device and tensioning device are installed, the roller frame of the upper and lower rollers can be installed, so that the conveyor belt has a curved arc that changes slowly, and the spacing of the roller frame in the turning section is the normal roller 1/2~1/3 of the rack spacing. After the roller is installed, it should be able to rotate flexibly and briskly.
Install the drive device: When installing the drive device, you must pay attention to make the drive shaft of the belt conveyor perpendicular to the center line of the belt conveyor, make the center of the width of the drive roller coincide with the center line of the conveyor, and the axis of the reducer is parallel to the drive axis . At the same time, all shafts and rollers should be leveled. The horizontal error of the shaft is allowed within the range of 0.5-1.5mm according to the width of the conveyor. While installing the driving device, you can install the tail wheel and other tensioning devices. The roller axis of the tensioning device should be perpendicular to the center line of the belt conveyor.

The posterior standard of the belt conveyor is to ensure that the conveyor belt always runs on the center line of the idler and drum. When installing the idler, frame and drum, the following requirements must be met:
1. Hanging the conveyor belt When hanging the conveyor belt, first spread the conveyor belt strip on the idler roller of the unloaded section, enclose the driving roller, and then lay it on the idler roller of the heavy-duty section. The 0.5-1.5t hand winch can be used for hanging the belt. When tightening the belt to connect, the roller of the tensioning device should be moved to the limit position, and the trolley and the spiral tensioning device should be pulled toward the transmission device; and the vertical picking device should move the roller to the upper side. Before tightening the conveyor belt, the reducer and motor should be installed, and the braking device should be installed on the inclined conveyor. After the belt conveyor is installed, an idling test machine is required.
2. The supporting structure frame must be straight and keep horizontal. For this reason, after the installation of the drive roller and the supporting roller frame, the centerline and level of the conveyor should be post-aligned. Then fix the rack to the foundation or floor. After the belt conveyor is fixed, feeding and unloading devices can be installed.
3. All rollers must be arranged in rows, parallel to each other, and kept horizontal. All the rollers are lined up in a row, parallel to each other.

PTJ Shop is Cnc Machining Expert has 12 years experience on custom non-standard parts. As a cnc machining factory We Material research & Design and manufacture products,Material types included machining aluminium,stainless steel,brass,copper,titanium,magnesium and plastic machining etc.,. our factory located in Dongguan, occupies an area Over 5,000 square meters.

Cnc Machining Online Quote Serviced aircraft&aerospace, automotive, LED lighting,bike,medical,electronic,mechanical,Oil&Energy and Military industries. Most of Our Customer business who base on Canada, Israel, Japan, Europe and USA, the business grow up year by year.

We are sincerely looking forward to your cooperation, warmly welcome you join us to share the market, and expand our business together!

Related Posts