Product Usage
This product is suitable for the salt spray corrosion test of parts, electronic hardware components, metal materials and industrial products.
The integral molding is welded at high temperature, corrosion-resistant, easy to clean, and no leakage.
The tower spray system is equipped with a salt liquid filtration system, no crystallization nozzles, the salt spray is evenly distributed, and the sedimentation volume is adjusted accurately.
The lid of the box is made of transparent material, which can clearly see the test items and spray conditions in the box
A water-tight structure is adopted between the box cover and the box body, and there is no salt spray overflow.
The circuit control board and other vital parts are fixed in a position that is convenient for inspection and maintenance. The side door is opened with a door lock, which is not only beautiful, but also convenient for maintenance.
Control System
High-precision PID temperature control instrument, error of ±0.1℃, Fuji, RKC, Honeywell meter (optional).
Optional continuous or periodic spray; multiple system protection, safe and reliable to use.
All circuits are equipped with circuit breakers, and all heaters are equipped with electronic and mechanical overheating protection devices.
Standards compliant
GB/T2423.17-2008, GB/T 2423.18-2000 “Basic Regulation Test Ka for Electrical and Electronic Products”, salt spray test method and GB/T10125-1997, GB/T10587-2006, GB10593.2-1990, GB/T1765 -1979, GB/T1771-2007, GB/T12967.3-2008, GB/T5170.8-2008 and equivalent IEC, MIL, DIN, ASTM and other related standards
Specifications and technical parameters
Model (CM) LP/YWX-150 LP/YWX-250 LP/YWX-750 LP/YWX-010 LP/YWX-020
Studio size 45*60*40 60*90*50 75*110*50 85*130*60 90*200*60
Dimensions 70*120*110 95*150*120 110*170*125 115*210*155 125*280*160
Power 1.3 (kw) 1.5 (kw) 4.0 (kw) 5.0 (kw) 6.5 (kw)
Temperature range: room temperature +5℃～55℃
Temperature uniformity ±2℃
Temperature fluctuation ±0.5℃
The amount of salt spray deposition is 1～2ml/80cm2.h
Continuous spray mode, optional cycle
Test timing 1～9999 (H, M, S) adjustable
Temperature control LED digital display PID+SSR microcomputer integrated controller
Temperature sensor platinum resistance. PT100Ω/MV
Heating system fully independent system, nickel-chromium alloy electric heating heater
Spray system tower spray device plus non-crystal nozzles (the mist particles are finer and evenly distributed)
Spray time 1～9999 (H, M, S) and the period is adjustable
Standard funnel and standard measuring cylinder for salt liquid collection
A water filter is installed at the suction pipe of the salt solution filter (to prevent the nozzle from clogging and terminate the test)
The salt solution preheats the temperature of the salt solution to be balanced with the temperature in the box (not causing the salt solution temperature to be too low to affect the test temperature)
The cabinet material is imported anti-corrosion, anti-aging, high-strength PVC board
The inner box material is imported corrosion-resistant, high-strength PVC/imported corrosion-resistant, high-strength, anti-aging, high-temperature resistant PP board
The cover material is imported corrosion-resistant, high-strength transparent PVC/imported corrosion-resistant, high-strength, high-temperature-resistant transparent PC board
Other accessories are made of stainless steel, copper or anti-corrosion and high temperature resistant materials
Standard configuration: round rod, 1 pair of V-shaped sample holder, 2 nozzles, funnel, 2 sets of measuring cylinders
Safety protection leakage, short circuit, over temperature, water shortage, end of test, over current protection
Power supply voltage AC220V±10% 50Hz AC380V±10% 50Hz
Use environment temperature 5℃～＋30℃ ≤85％RH
The seal adopts a water-tight structure, no salt spray overflows
Note: This test box complies with GB2423.17-2008, and equivalent IEC, MIL, DIN, ASTM, etc.
Related standards This test box can be extended to the humid and hot salt fog box. Humidity range: 85-95%
Can be done separately for damp heat test or salt spray test
PTJ Shop is Cnc Machining Expert has 12 years experience on custom non-standard parts. As a cnc machining factory We Material research & Design and manufacture products,Material types included machining aluminium,stainless steel,brass,copper,titanium,magnesium and plastic machining etc.,. our factory located in Dongguan, occupies an area Over 5,000 square meters.
Cnc Machining Online Quote Serviced aircraft&aerospace, automotive, LED lighting,bike,medical,electronic,mechanical,Oil&Energy and Military industries. Most of Our Customer business who base on Canada, Israel, Japan, Europe and USA, the business grow up year by year.
We are sincerely looking forward to your cooperation, warmly welcome you join us to share the market, and expand our business together!
